Skip to content

Fairview Fire and EMS Frequencies

We do not have frequencies listed specifically for Fairview in Collin County, Texas yet. Countywide channels for Collin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is McKinney Simulcast (McKinney), about 5 miles away.

About Fairview Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Fairview: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Collin County channels that also cover Fairview

EMS Dispatch

EMS Dispatch frequencies for Collin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AMR Ambulance ServiceDispatch for Unincorporated Collin Co. Medical Response453.0750
In 458.0750
192.8 PLFMWPRS344
PHI Airmed EMSPHI Med 2 Dispatch152.9525
In 160.1250
118.8 PLFMWPZR839

Nearest trunked radio sites

Distances are measured from the center of Fairview.

McKinney Simulcast · McKinney
RFSS 1 · Site 1 (hex 1) · NAC 380 · about 5 mi away
Control 856.3625, 857.3625, 858.3625, 859.3625
Voice 854.2625, 854.7375
NCTCOG Collin · Dallas P25 / NCTCOG
Project 25 · RFSS 1 · Site 21 (hex 15) · NAC 370 · about 6 mi away
Control 769.56875, 770.35625, 770.60625
Voice 769.31875
Frisco · Frisco
RFSS 1 · Site 1 (hex 1) · NAC 360 · about 11 mi away
Control 858.1875, 858.6125, 859.0375, 859.6125
Voice 851.0625, 852.0625, 853.0625, 854.2125, 856.6125, 857.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Fairview?

We do not have a EMS dispatch channel listed specifically for Fairview. The county-level EMS dispatch channels in the same county: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Fairview?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fairview?

For Fairview, start with the McKinney Simulcast site of McKinney. Its control channels are 856.3625, 857.3625, 858.3625, 859.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.