Skip to content

Murphy Fire and EMS Frequencies

Murphy in Collin County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Richardson Simulcast (Richardson P25), about 8 miles away.

About Murphy Fire and EMS Frequencies

Quick answer: Fire dispatch for Murphy: Murphy Fire 154.3850 MHz, FM, 127.3 PL. County-level ems dispatch that covers Murphy: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Murphy conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Murphy
AgencyDescriptionFrequency (MHz)ToneModeFCC
Murphy FireMurphy Fire Department Tone Out/Backup Dispatch154.3850
In 156.0300
127.3 PLFMKWX551

Collin County channels that also cover Murphy

EMS Dispatch

EMS Dispatch frequencies for Collin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AMR Ambulance ServiceDispatch for Unincorporated Collin Co. Medical Response453.0750
In 458.0750
192.8 PLFMWPRS344
PHI Airmed EMSPHI Med 2 Dispatch152.9525
In 160.1250
118.8 PLFMWPZR839

Nearest trunked radio sites

Distances are measured from the center of Murphy.

Richardson Simulcast · Richardson P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C71 · about 8 mi away
Control 852.325, 852.35, 852.375, 859.4125
Voice 852.275
GMRS Simulcast · Garland, Mesquite, Rowlett, Sachse (GMRS)
RFSS 1 · Site 1 (hex 1) · NAC 891 · about 11 mi away
Control 772.93125, 773.43125, 774.13125, 774.68125
Voice 769.53125, 769.80625, 770.33125, 770.80625, 771.24375, 771.49375, 771.64375, 771.90625, 772.04375, 772.16875, 772.43125, 772.68125
McKinney Simulcast · McKinney
RFSS 1 · Site 1 (hex 1) · NAC 380 · about 14 mi away
Control 856.3625, 857.3625, 858.3625, 859.3625
Voice 854.2625, 854.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Murphy?

Fire dispatch channels listed for Murphy: Murphy Fire 154.3850 MHz, FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Murphy?

We do not have a EMS dispatch channel listed specifically for Murphy. The county-level EMS dispatch channels in the same county: AMR Ambulance Service 453.0750 MHz, FM, 192.8 PL; PHI Airmed EMS 152.9525 MHz, FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Murphy?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Murphy?

For Murphy, start with the Richardson Simulcast site of Richardson P25. Its control channels are 852.325, 852.35, 852.375, 859.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Murphy fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Murphy are marked encrypted.