About Morton Fire and EMS Frequencies
Quick answer: Fire dispatch for Morton: Morton Fire 158.7750 MHz, FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Morton conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morton Fire | Fire and Police Dispatch | 158.7750 In 153.8600 | FM | WNXY769 |
Cochran County channels that also cover Morton
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cochran County EMS | EMS/Dispatch by South Plains EMS | 463.1500 In 468.1500 | 136.5 PL | FM | KNAJ354 |
Nearest trunked radio sites
Distances are measured from the center of Morton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Morton?
Fire dispatch channels listed for Morton: Morton Fire 158.7750 MHz, FM, no tone.
What scanner do I need to listen to fire and EMS in Morton?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Morton?
For Morton, start with the Campus site of Texas Tech University. Its control channels are 858.4625, 858.9625, 859.4375, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Morton fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Morton are marked encrypted.