About Smyer Fire and EMS Frequencies
Quick answer: Fire dispatch for Smyer: Smyer Fire 155.7750 MHz, narrow FM, 141.3 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Smyer conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Smyer Fire | Smyer Fire and Police Primary | 155.7750 In 153.9200 | 141.3 PL | FMN | WPPH947 |
Hockley County channels that also cover Smyer
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hockley County Fire | Hockley Sheriff's Office Dispatch | 158.8275 In 153.9425 | P25 | KVV884 |
Nearest trunked radio sites
Distances are measured from the center of Smyer.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Smyer?
Fire dispatch channels listed for Smyer: Smyer Fire 155.7750 MHz, narrow FM, 141.3 PL.
What scanner do I need to listen to fire and EMS in Smyer?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Smyer?
For Smyer, start with the Campus site of Texas Tech University. Its control channels are 858.4625, 858.9625, 859.4375, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Smyer fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Smyer are marked encrypted.