About Burleson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Burleson County: Burleson County Fire 154.3850 MHz, narrow FM, 141.3 PL. Trunked: North Texas Interoperable Radio Network (NTIRN), for example Burleson County Fire talkgroup 6655 (hex 19ff).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Texas Interoperable Radio Network (NTIRN): 7 talkgroups; Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Burleson County, start with the Caldwell site of Texas Wide Area Radio Network (TxWARN). Its control channels: 772.40625, 773.64375 MHz.
Data updated .
Burleson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 154.3850 In 154.1300 | 141.3 PL | FMN | WQCJ590 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Burleson County EMS | EMS Operations (not monitored by dispatch) | 151.1525 In 158.9475 | 032 DPL | FMN | WQXC851 |
Burleson County trunked talkgroups
North Texas Interoperable Radio Network (NTIRN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 6655 | 19ff | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6656 | 1a00 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6657 | 1a01 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6658 | 1a02 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6659 | 1a03 | D |
| Burleson County Fire | Fire Marshal | 6660 | 1a04 | D |
| Burleson County Fire | Fire Special Event | 6661 | 1a05 | D |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 2944 | b80 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 2945 | b81 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2946 | b82 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2947 | b83 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2948 | b84 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2949 | b85 | D |
| Burleson County EMS | Burleson County EMS – Dispatch | 2950 | b86 | D |
| Burleson County EMS | Burleson County EMS – Tactical Channel | 2951 | b87 | D |
| Burleson County Hospital | Burleson St. Joseph ER | 3755 | eab | D |
Radio system sites in Burleson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Burleson County
Common questions
What frequency does the fire department use in Burleson County?
Fire dispatch channels listed for Burleson County: Burleson County Fire 154.3850 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Burleson County?
Yes. Fire and EMS talkgroups are listed for North Texas Interoperable Radio Network (NTIRN): 7 talkgroups; Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Burleson County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Burleson County?
For Burleson County, start with the Caldwell site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.40625, 773.64375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Burleson County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Burleson County are marked encrypted.
Are Burleson County fire and EMS talkgroups encrypted?
None of the 16 talkgroups listed for Burleson County are marked encrypted.