About Frenstat Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Frenstat: Burleson County Fire 154.3850 MHz, narrow FM, 141.3 PL. Trunked: North Texas Interoperable Radio Network (NTIRN), for example Burleson County Fire talkgroup 6655 (hex 19ff).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Texas Interoperable Radio Network (NTIRN): 7 talkgroups; Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Burleson County channels that also cover Frenstat
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 154.3850 In 154.1300 | 141.3 PL | FMN | WQCJ590 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Burleson County EMS | EMS Operations (not monitored by dispatch) | 151.1525 In 158.9475 | 032 DPL | FMN | WQXC851 |
North Texas Interoperable Radio Network (NTIRN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 6655 | 19ff | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6656 | 1a00 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6657 | 1a01 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6658 | 1a02 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 6659 | 1a03 | D |
| Burleson County Fire | Fire Marshal | 6660 | 1a04 | D |
| Burleson County Fire | Fire Special Event | 6661 | 1a05 | D |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Burleson County Fire | Burleson County Fire – Dispatch | 2944 | b80 | D |
| Burleson County Fire | Burleson County Fire – Fire Ground | 2945 | b81 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2946 | b82 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2947 | b83 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2948 | b84 | D |
| Burleson County Fire | Burleson County Fire – Tactical Channel | 2949 | b85 | D |
| Burleson County EMS | Burleson County EMS – Dispatch | 2950 | b86 | D |
| Burleson County EMS | Burleson County EMS – Tactical Channel | 2951 | b87 | D |
| Burleson County Hospital | Burleson St. Joseph ER | 3755 | eab | D |
Common questions
What frequency does the fire department use in Frenstat?
We do not have a fire dispatch channel listed specifically for Frenstat. The county-level fire dispatch channels in the same county: Burleson County Fire 154.3850 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Frenstat?
Yes. The county-level systems that cover Frenstat are Fire and EMS talkgroups are listed for North Texas Interoperable Radio Network (NTIRN): 7 talkgroups; Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Frenstat?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.