Skip to content

Zephyr Fire and EMS Frequencies

We do not have frequencies listed specifically for Zephyr in Brown County, Texas yet. Countywide channels for Brown County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Stephenville (Granbury Regional Radio Network), about 51 miles away.

About Zephyr Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Zephyr: Brown County EMS 159.7650 MHz, narrow FM, 114 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Brown County channels that also cover Zephyr

EMS Dispatch

EMS Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County EMSLifeguard EMS Dispatch159.7650
In 152.8700
114 DPLFMNWQRZ623

Nearest trunked radio sites

Distances are measured from the center of Zephyr.

Stephenville · Granbury Regional Radio Network
RFSS 1 · Site 1 (hex 1) · NAC 001 · about 51 mi away
Control 770.28125, 771.70625, 772.93125, 773.93125
NW Erath County Simulcast · Granbury Regional Radio Network
RFSS 40 · Site 40 (hex 28) · NAC 028 · about 51 mi away
Control 769.58125, 772.68125, 773.43125, 774.23125
Llano North · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 75 (hex 4B) · NAC 135 · about 57 mi away
Control 152.1125, 152.7125
Voice 152.5775
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Zephyr?

We do not have a EMS dispatch channel listed specifically for Zephyr. The county-level EMS dispatch channels in the same county: Brown County EMS 159.7650 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Zephyr?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Zephyr?

For Zephyr, start with the Stephenville site of Granbury Regional Radio Network. Its control channels are 770.28125, 771.70625, 772.93125, 773.93125 MHz. Program a control channel first; the scanner finds the voice channels from it.