About Early Fire and EMS Frequencies
Quick answer: Fire dispatch for Early: Early Fire 154.2050 MHz, FM, 94.8 PL. County-level ems dispatch that covers Early: Brown County EMS 159.7650 MHz, narrow FM, 114 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Early conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Early Fire | Early Fire – Dispatch | 154.2050 In 150.7900 | 94.8 PL | FM | WPKF648 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Early Fire | Early Fire – Fire Ground | 154.2050 | CSQ | FM | WPKF648 |
Brown County channels that also cover Early
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brown County EMS | Lifeguard EMS Dispatch | 159.7650 In 152.8700 | 114 DPL | FMN | WQRZ623 |
Nearest trunked radio sites
Distances are measured from the center of Early.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Early?
Fire dispatch channels listed for Early: Early Fire 154.2050 MHz, FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Early?
We do not have a EMS dispatch channel listed specifically for Early. The county-level EMS dispatch channels in the same county: Brown County EMS 159.7650 MHz, narrow FM, 114 DPL.
What scanner do I need to listen to fire and EMS in Early?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Early?
For Early, start with the NW Erath County Simulcast site of Granbury Regional Radio Network. Its control channels are 769.58125, 772.68125, 773.43125, 774.23125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Early fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Early are marked encrypted.