Skip to content

Kopperl Fire and EMS Frequencies

We do not have frequencies listed specifically for Kopperl in Bosque County, Texas yet. Countywide channels for Bosque County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Blum (Hill County), about 7 miles away.

About Kopperl Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Kopperl: Bosque County Fire 154.2500 MHz, FM, 100.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bosque County channels that also cover Kopperl

Fire Dispatch

Fire Dispatch frequencies for Bosque County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bosque County FireBosque Fire Dispatch (Analog mode)154.2500
In 150.7750
100.0 PLFMWPKX515
Bosque County FireBosque Fire Dispatch (P25 mode)154.2500
In 150.7750
NAC 1A0P25WPKX515

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bosque County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bosque County FireClifton Fire154.250074.4 PLFMWQCZ725
Bosque County FireGap Fire154.250079.7 PLFMWQCZ725
Bosque County FireLakeside Fire154.250077.0 PLFMWQCZ725
Bosque County FireWestshore Fire154.250071.9 PLFMWQCZ725

Nearest trunked radio sites

Distances are measured from the center of Kopperl.

Blum · Hill County
RFSS 5 · Site 5 (hex 5) · NAC F · about 7 mi away
Control 854.5625, 858.275, 859.275
SW Johnson Co · North Texas Interoperable Radio Network (NTIRN)
RFSS 1 · Site 9 (hex 9) · NAC 445 · about 9 mi away
Control 772.58125, 772.83125
Voice 772.33125
Laguna Park · Hill County
RFSS 3 · Site 3 (hex 3) · NAC D · about 13 mi away
Control 854.0875, 856.0375, 857.0375, 858.0875
Voice 854.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Kopperl?

We do not have a fire dispatch channel listed specifically for Kopperl. The county-level fire dispatch channels in the same county: Bosque County Fire 154.2500 MHz, FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Kopperl?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Kopperl?

For Kopperl, start with the Blum site of Hill County. Its control channels are 854.5625, 858.275, 859.275 MHz. Program a control channel first; the scanner finds the voice channels from it.