Skip to content

Bosque County Fire and EMS Frequencies

Bosque County in Texas has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Bosque County Fire and EMS Frequencies

Quick answer: Fire dispatch for Bosque County: Bosque County Fire 154.2500 MHz, FM, 100.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bosque County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bosque County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bosque County FireBosque Fire Dispatch (Analog mode)154.2500
In 150.7750
100.0 PLFMWPKX515
Bosque County FireBosque Fire Dispatch (P25 mode)154.2500
In 150.7750
NAC 1A0P25WPKX515

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bosque County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bosque County FireClifton Fire154.250074.4 PLFMWQCZ725
Bosque County FireGap Fire154.250079.7 PLFMWQCZ725
Bosque County FireLakeside Fire154.250077.0 PLFMWQCZ725
Bosque County FireWestshore Fire154.250071.9 PLFMWQCZ725

Radio system sites in Bosque County

Program the control channel first; your scanner finds the voice channels from it.

Laguna Park · Hill County
RFSS 3 · Site 3 (hex 3) · NAC D
Control 854.0875, 856.0375, 857.0375, 858.0875
Voice 854.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Bosque County

Common questions

What frequency does the fire department use in Bosque County?

Fire dispatch channels listed for Bosque County: Bosque County Fire 154.2500 MHz, FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Bosque County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bosque County?

For Bosque County, start with the Laguna Park site of Hill County. Its control channels are 854.0875, 856.0375, 857.0375, 858.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bosque County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Bosque County are marked encrypted.