Skip to content

Austin County Fire and EMS Frequencies

Austin County in Texas has 2 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 17 cities and communities below for local fire departments and EMS agencies.

About Austin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Austin County: Austin County Fire 154.3250 MHz, FM, 107.2 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Austin County Fire talkgroup 2305 (hex 901).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Austin County, start with the Wallis site of Texas Wide Area Radio Network (TxWARN). Its control channels: 772.46875, 772.84375 MHz.

Data updated .

Austin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Austin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Austin County FireFire/EMS Primary (except Bellville)154.3250
In 156.0750
107.2 PLFMWPMR424

EMS Talk-around

EMS Talk-around frequencies for Austin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Austin County EMSEMS Talkaround (Channel 8)158.8650107.2 PLFMKB94611

Austin County trunked talkgroups

Texas Wide Area Radio Network (TxWARN)

Texas Wide Area Radio Network (TxWARN) talkgroups
AgencyDescriptionTalkgroupHexMode
Austin County FireAustin County Fire – Dispatch2305901D
Austin County FireAustin County Fire – Tactical Channel22448c4D
Austin County FireAustin County Fire – Tactical Channel22458c5D
Austin County FireAustin County Fire – Tactical Channel2306902D
Austin County EMSAustin County EMS – Dispatch2308904D
Austin County EMSAustin County EMS – Tactical Channel2309905D
Austin County EMSEMS Supervisors12314cfD

Radio system sites in Austin County

Program the control channel first; your scanner finds the voice channels from it.

Wallis · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 15 (hex F)
Control 772.46875, 772.84375
Voice 769.81875, 770.06875, 770.61875, 771.59375
San Felipe · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 19 (hex 13) · NAC 1A0
Control 853.3, 853.5875
Voice 851.3375, 851.5875, 852.0875, 853.0625
Bleiblerville · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 20 (hex 14)
Control 853.3375, 853.8
Voice 851.125, 851.4125, 851.8125, 852.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Austin County

Common questions

What frequency does the fire department use in Austin County?

Fire dispatch channels listed for Austin County: Austin County Fire 154.3250 MHz, FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Austin County?

Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Austin County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Austin County?

For Austin County, start with the Wallis site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.46875, 772.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Austin County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Austin County are marked encrypted.

Are Austin County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Austin County are marked encrypted.