About Coventry Fire and EMS Frequencies
Quick answer: Fire dispatch for Coventry: Coventry Fire 453.1250 MHz, narrow FM, 546 DPL. Trunked: Rhode Island Statewide Communications Network (RISCON), for example Coventry Fire talkgroup 1480 (hex 5c8).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Rhode Island Statewide Communications Network (RISCON): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Coventry, start with the North Simulcast site of Rhode Island Statewide Communications Network (RISCON), about 13 miles away. Its control channels: 851.85, 852.4, 852.675 MHz.
Data updated .
Coventry conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Coventry Fire | Coventry Fire – Townwide Operations | 453.1250 In 458.1250 | 546 DPL | FMN | WPKC426 |
| Coventry Fire | Coventry Fire – West Multicast of Operations FD1 | 460.5000 In 465.5000 | 606 DPL | FMN | WQCR236 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Coventry Fire | Fire Fireground | 453.7375 In 458.7375 | 546 DPL | FMN | WNSC440 |
Coventry trunked talkgroups
Rhode Island Statewide Communications Network (RISCON)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Coventry Fire | Coventry Fire – Dispatch | 1480 | 5c8 | D |
Nearest trunked radio sites
Distances are measured from the center of Coventry.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Coventry?
Fire dispatch channels listed for Coventry: Coventry Fire 453.1250 MHz, narrow FM, 546 DPL.
Do fire departments and EMS use a trunked radio system in Coventry?
Yes. Fire and EMS talkgroups are listed for Rhode Island Statewide Communications Network (RISCON): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Coventry?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Coventry?
For Coventry, start with the North Simulcast site of Rhode Island Statewide Communications Network (RISCON). Its control channels are 851.85, 852.4, 852.675, 853.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Coventry fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Coventry are marked encrypted.
Are Coventry fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Coventry are marked encrypted.