About Warwick Fire and EMS Frequencies
Quick answer: Fire dispatch for Warwick: Warwick Fire 153.7700 MHz, narrow FM, 103.5 PL. Trunked: Rhode Island Statewide Communications Network (RISCON), for example Warwick Fire talkgroup 1162 (hex 48a).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Rhode Island Statewide Communications Network (RISCON): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Warwick, start with the Metro Simulcast site of Rhode Island Statewide Communications Network (RISCON), about 8 miles away. Its control channels: 853.0375, 853.15, 853.275 MHz.
Data updated .
Warwick conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warwick Fire | Warwick Fire – RISCON Simulcast | 153.7700 | 103.5 PL | FMN | WQD348 |
| Warwick Fire | Warwick Fire – Backup | 154.3100 In 155.0550 | 162.2 PL | FMN | WRZ305 |
| Warwick Fire | TF Green Airport Fire | 154.3550 | 100.0 PL | FMN | WNRJ823 |
Warwick trunked talkgroups
Rhode Island Statewide Communications Network (RISCON)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warwick Fire | Warwick Fire – Dispatch | 1162 | 48a | D |
| Warwick Fire | Warwick Fire – Fire Ground | 1170 | 492 | D |
| Warwick Fire | Fire Operations F4 | 1171 | 493 | D |
Nearest trunked radio sites
Distances are measured from the center of Warwick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Warwick?
Fire dispatch channels listed for Warwick: Warwick Fire 153.7700 MHz, narrow FM, 103.5 PL.
Do fire departments and EMS use a trunked radio system in Warwick?
Yes. Fire and EMS talkgroups are listed for Rhode Island Statewide Communications Network (RISCON): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Warwick?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Warwick?
For Warwick, start with the Metro Simulcast site of Rhode Island Statewide Communications Network (RISCON). Its control channels are 853.0375, 853.15, 853.275, 853.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Warwick fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Warwick are marked encrypted.
Are Warwick fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Warwick are marked encrypted.