Skip to content

Wasco County Fire and EMS Frequencies

Wasco County in Oregon has 18 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About Wasco County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wasco County: Hood River Fire 158.8050 MHz, narrow FM, no tone; Juniper Flats RFPD Fire 154.3100 MHz, narrow FM, 107.2 PL; Mid-Columbia Fire and Rescue 154.3700 MHz, narrow FM, 192.8 PL. Trunked: Oregon State Radio Project, for example Wasco County Fire talkgroup 33150 (hex 817e).

  • 18 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wasco County, start with the Hulse Ranch site of Oregon State Radio Project. Its control channels: 770.46875, 771.91875, 773.83125 MHz.

Data updated .

Wasco County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wasco County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River FireFire Operations158.8050
In 153.9950
FMN—
Juniper Flats RFPD FireJuniper Flats RFPD Fire – Dispatch154.3100
In 159.1050
107.2 PLFMN—
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Dispatch154.3700192.8 PLFMNKNIZ415
Mosier RFPD FireMosier RFPD Fire – Dispatch156.1650FMN—
Shaniko RFPD FireSouth Fire Bake Oven159.0900
In 153.9650
703 DPLFMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wasco County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River FireHood River Fire – Tactical Channel154.1750FMN—
Hood River FireHood River Fire – Tactical Channel154.2350FMN—
Juniper Flats RFPD FireJuniper Flats RFPD Fire – Tactical Channel158.7450107.2 PLFMN—
Maupin RFPD FireMaupin RFPD Fire – Tactical Channel154.3850315 DPLFMN—
Mid-Columbia Fire and RescueTactical A153.9650FMNWQBD646
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel154.1750FMNKNIZ415
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel154.2050FMNKNIZ415
Mid-Columbia Fire and RescueTactical B154.3400FMNKNIZ415
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel155.2500FMNWQBD646
Mid-Columbia Fire and RescueTactical C158.9700FMNWQBD646
Mid-Columbia Fire and RescueTactical D159.0600FMNWQBD646
Mosier RFPD FireWorking Tactical154.4450FMN—
Shaniko RFPD FireShaniko RFPD Fire – Tactical Channel155.7750110.9 PLFMN—

Wasco County trunked talkgroups

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Wasco County FirePatch to Mid Columbia Fire & Rescue Dispatch 154.37033150817eT

Radio system sites in Wasco County

Program the control channel first; your scanner finds the voice channels from it.

Hulse Ranch · Oregon State Radio Project
RFSS 8 · Site 8 (hex 8) · NAC 008
Control 770.46875, 771.91875, 773.83125, 774.28125, 774.56875
Foreman Point · Oregon State Radio Project
RFSS 14 · Site 14 (hex E)
Control 769.96875, 770.69375, 771.19375, 771.90625, 773.28125, 773.78125, 774.33125
Shaniko · Oregon State Radio Project
RFSS 28 · Site 28 (hex 1C) · NAC 01C
Control 769.66875, 770.41875, 770.66875, 773.55625, 774.30625, 774.55625
The Dalles Simulcast · Oregon State Radio Project
RFSS 80 · Site 80 (hex 50) · NAC 050
Control 769.21875, 770.44375, 771.18125, 773.03125, 773.56875, 774.29375, 774.83125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wasco County

Common questions

What frequency does the fire department use in Wasco County?

Fire dispatch channels listed for Wasco County: Hood River Fire 158.8050 MHz, narrow FM, no tone; Juniper Flats RFPD Fire 154.3100 MHz, narrow FM, 107.2 PL; Mid-Columbia Fire and Rescue 154.3700 MHz, narrow FM, 192.8 PL; Mosier RFPD Fire 156.1650 MHz, narrow FM, no tone; Shaniko RFPD Fire 159.0900 MHz, narrow FM, 703 DPL.

Do fire departments and EMS use a trunked radio system in Wasco County?

Yes. Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wasco County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wasco County?

For Wasco County, start with the Hulse Ranch site of Oregon State Radio Project. Its control channels are 770.46875, 771.91875, 773.83125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wasco County fire and EMS frequencies encrypted?

None of the 18 conventional frequencies listed for Wasco County are marked encrypted.

Are Wasco County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Wasco County are marked encrypted.