Skip to content

Maupin Fire and EMS Frequencies

We do not have frequencies listed specifically for Maupin in Wasco County, Oregon yet. Countywide channels for Wasco County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hulse Ranch (Oregon State Radio Project), about 9 miles away.

About Maupin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Maupin: Hood River Fire 158.8050 MHz, narrow FM, no tone; Juniper Flats RFPD Fire 154.3100 MHz, narrow FM, 107.2 PL; Mid-Columbia Fire and Rescue 154.3700 MHz, narrow FM, 192.8 PL. Trunked: Oregon State Radio Project, for example Wasco County Fire talkgroup 33150 (hex 817e).

  • 18 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Maupin, start with the Hulse Ranch site of Oregon State Radio Project, about 9 miles away. Its control channels: 770.46875, 771.91875, 773.83125 MHz.

Data updated .

Wasco County channels that also cover Maupin

Fire Dispatch

Fire Dispatch frequencies for Wasco County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River FireFire Operations158.8050
In 153.9950
FMN—
Juniper Flats RFPD FireJuniper Flats RFPD Fire – Dispatch154.3100
In 159.1050
107.2 PLFMN—
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Dispatch154.3700192.8 PLFMNKNIZ415
Mosier RFPD FireMosier RFPD Fire – Dispatch156.1650FMN—
Shaniko RFPD FireSouth Fire Bake Oven159.0900
In 153.9650
703 DPLFMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wasco County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River FireHood River Fire – Tactical Channel154.1750FMN—
Hood River FireHood River Fire – Tactical Channel154.2350FMN—
Juniper Flats RFPD FireJuniper Flats RFPD Fire – Tactical Channel158.7450107.2 PLFMN—
Maupin RFPD FireMaupin RFPD Fire – Tactical Channel154.3850315 DPLFMN—
Mid-Columbia Fire and RescueTactical A153.9650FMNWQBD646
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel154.1750FMNKNIZ415
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel154.2050FMNKNIZ415
Mid-Columbia Fire and RescueTactical B154.3400FMNKNIZ415
Mid-Columbia Fire and RescueMid-Columbia Fire and Rescue – Tactical Channel155.2500FMNWQBD646
Mid-Columbia Fire and RescueTactical C158.9700FMNWQBD646
Mid-Columbia Fire and RescueTactical D159.0600FMNWQBD646
Mosier RFPD FireWorking Tactical154.4450FMN—
Shaniko RFPD FireShaniko RFPD Fire – Tactical Channel155.7750110.9 PLFMN—

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Wasco County FirePatch to Mid Columbia Fire & Rescue Dispatch 154.37033150817eT

Nearest trunked radio sites

Distances are measured from the center of Maupin.

Hulse Ranch · Oregon State Radio Project
RFSS 8 · Site 8 (hex 8) · NAC 008 · about 9 mi away
Control 770.46875, 771.91875, 773.83125, 774.28125, 774.56875
Shaniko · Oregon State Radio Project
RFSS 28 · Site 28 (hex 1C) · NAC 01C · about 16 mi away
Control 769.66875, 770.41875, 770.66875, 773.55625, 774.30625, 774.55625
Foreman Point · Oregon State Radio Project
RFSS 14 · Site 14 (hex E) · about 16 mi away
Control 769.96875, 770.69375, 771.19375, 771.90625, 773.28125, 773.78125, 774.33125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Maupin?

We do not have a fire dispatch channel listed specifically for Maupin. The county-level fire dispatch channels in the same county: Hood River Fire 158.8050 MHz, narrow FM, no tone; Juniper Flats RFPD Fire 154.3100 MHz, narrow FM, 107.2 PL; Mid-Columbia Fire and Rescue 154.3700 MHz, narrow FM, 192.8 PL; Mosier RFPD Fire 156.1650 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Maupin?

Yes. The county-level systems that cover Maupin are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Maupin?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Maupin?

For Maupin, start with the Hulse Ranch site of Oregon State Radio Project. Its control channels are 770.46875, 771.91875, 773.83125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.