Skip to content

Polk County Fire and EMS Frequencies

Polk County in Oregon has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About Polk County Fire and EMS Frequencies

Quick answer: Fire dispatch for Polk County: Polk County Fire Dispatch 151.2650 MHz, narrow FM, 110.9 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Polk County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County Fire DispatchPolk County Fire Dispatch151.2650
In 159.0150
110.9 PLFMNKGR262

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County Fire Ops Eagle Crest RepeaterPolk County Fire Operations Eagle Crest Repeater154.2350
In 155.9850
110.9 PLFMNKNAT381
Polk County Fire Ops Fishback RepeaterPolk County Fire Operations Fishback Repeater153.7400
In 159.1725
110.9 PLFMNKGR262
Polk County Fire TAC and TrainingPolk County Fire Tactical and Training154.4450CSQFMNKNAT381

EMS Tactical

EMS Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County EMSEMS Mednet155.3400CSQFMNWZU431

Radio system sites in Polk County

Program the control channel first; your scanner finds the voice channels from it.

Salem (West) · Oregon State Radio Project
RFSS 3 · Site 3 (hex 3) · NAC 003
Control 769.46875, 769.91875, 770.66875, 770.95625, 771.53125, 773.28125, 773.53125, 773.78125, 774.05625, 774.58125
Doane Creek · Oregon State Radio Project
RFSS 5 · Site 5 (hex 5) · NAC 005
Control 769.69375, 770.81875, 771.24375, 773.19375, 774.33125
Bald Mountain · Oregon State Radio Project
RFSS 37 · Site 37 (hex 25) · NAC 025
Control 770.80625, 771.23125, 771.54375, 773.18125, 774.04375, 774.55625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Polk County

Common questions

What frequency does the fire department use in Polk County?

Fire dispatch channels listed for Polk County: Polk County Fire Dispatch 151.2650 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Polk County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Polk County?

For Polk County, start with the Salem (West) site of Oregon State Radio Project. Its control channels are 769.46875, 769.91875, 770.66875, 770.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Polk County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Polk County are marked encrypted.