Skip to content

Salem Fire and EMS Frequencies

We do not have frequencies listed specifically for Salem in Polk County, Oregon yet. Countywide channels for Polk County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Site 1 (Salem P25), about 1 miles away.

Salem also extends into Marion County.

About Salem Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Salem: Polk County Fire Dispatch 151.2650 MHz, narrow FM, 110.9 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Polk County channels that also cover Salem

Fire Dispatch

Fire Dispatch frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County Fire DispatchPolk County Fire Dispatch151.2650
In 159.0150
110.9 PLFMNKGR262

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County Fire Ops Eagle Crest RepeaterPolk County Fire Operations Eagle Crest Repeater154.2350
In 155.9850
110.9 PLFMNKNAT381
Polk County Fire Ops Fishback RepeaterPolk County Fire Operations Fishback Repeater153.7400
In 159.1725
110.9 PLFMNKGR262
Polk County Fire TAC and TrainingPolk County Fire Tactical and Training154.4450CSQFMNKNAT381

EMS Tactical

EMS Tactical frequencies for Polk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk County EMSEMS Mednet155.3400CSQFMNWZU431

Nearest trunked radio sites

Distances are measured from the center of Salem.

Site 1 · Salem P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 8E1 · about 1 mi away
Control 852.2625, 853.95, 856.4375, 858.8625
Voice 851.1, 851.6, 852.05
Salem (West) · Oregon State Radio Project
RFSS 3 · Site 3 (hex 3) · NAC 003 · about 7 mi away
Control 769.46875, 769.91875, 770.66875, 770.95625, 771.53125, 773.28125, 773.53125, 773.78125, 774.05625, 774.58125
Wipper Hill · Oregon State Radio Project
RFSS 2 · Site 2 (hex 2) · NAC 002 · about 10 mi away
Control 769.43125, 769.96875, 770.41875, 773.29375, 773.80625, 774.08125, 774.53125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Salem?

We do not have a fire dispatch channel listed specifically for Salem. The county-level fire dispatch channels in the same county: Polk County Fire Dispatch 151.2650 MHz, narrow FM, 110.9 PL.

What scanner do I need to listen to fire and EMS in Salem?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Salem?

For Salem, start with the Site 1 site of Salem P25. Its control channels are 852.2625, 853.95, 856.4375, 858.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.