About Sprague River Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sprague River: Klamath County Fire 154.0700 MHz, narrow FM, 192.8 PL. Trunked: Oregon State Radio Project, for example Klamath County Fire talkgroup 40922 (hex 9fda).
- 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sprague River, start with the Walker Mtn site of Oregon State Radio Project, about 60 miles away. Its control channels: 769.20625, 770.70625, 773.31875 MHz.
Data updated .
Klamath County channels that also cover Sprague River
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Klamath County Fire | Fire District – Firecom | 154.0700 | 192.8 PL | FMN | KNIQ200 |
| Klamath County Fire | Fire District 2 | 154.4450 | FMN | — | |
| Klamath County Fire | Fire District 4 | 453.7125 | FMN | — | |
| Klamath County Fire | Fire District 5 | 458.7125 | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Klamath County Fire | Fire District – East County Working | 153.8900 | FMN | WPKF637 | |
| Klamath County Fire | County Fire Tactical | 153.8900 In 154.4150 | 151.4 PL | FMN | KNAW669 |
| Klamath County Fire | Fire District – Central County Working | 153.9500 | FMN | WZU636 | |
| Klamath County Fire | Fire District – North County Working | 154.1750 | FMN | — | |
| Klamath County Fire | Fire District – South County Working (1) | 154.3550 | FMN | KNBL289 | |
| Klamath County Fire | Search and Rescue | 155.1600 | FMN | KTO395 | |
| Klamath County Fire | Fire District – South County Working (2) | 155.8200 | FMN | KON936 |
Oregon State Radio Project
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Klamath County Fire | Klamath County Fire – Dispatch | 40922 | 9fda | T |
Nearest trunked radio sites
Distances are measured from the center of Sprague River.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sprague River?
We do not have a fire dispatch channel listed specifically for Sprague River. The county-level fire dispatch channels in the same county: Klamath County Fire 154.0700 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Sprague River?
Yes. The county-level systems that cover Sprague River are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sprague River?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sprague River?
For Sprague River, start with the Walker Mtn site of Oregon State Radio Project. Its control channels are 769.20625, 770.70625, 773.31875, 773.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.