Skip to content

Washington County Fire and EMS Frequencies

Washington County in Oklahoma has 5 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 154.1300 MHz, narrow FM, 67.0 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Washington County Fire talkgroup 409 (hex 199).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 853.4625, 853.7625 MHz.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireFire Tone Out154.130067.0 PLFMNWNAZ440
Washington County FireCounty Fire154.3550
In 153.7700
107.2 PLFMNWNAZ440
Washington County FireCounty Fire -South Repeater155.9250
In 158.9250
107.2 PLFMNWPPB912
Washington County FireFire UHF – Linked to 154.130 MHz453.2625
In 458.2625
263 DPLFMNWQAQ798

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Oglesby FireOglesby Fire – Fire Ground154.4300
In 158.8575
141.3 PLFMNWNPB236

Washington County trunked talkgroups

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireCounty Rural Fire Dispatch409199D
Washington County FireFireground 2 – Bartlesville41119bD
Washington County FireFireground 3 – Ochelata41319dD
Washington County FireWashington County Fire – Fire Ground41519fD
Washington County FireWashington County Fire – Fire Ground4171a1D
Washington County FireWashington County Fire – Fire Ground4191a3D
Washington County FireWashington County Fire – Fire Ground4211a5D
Washington County FireFireground 8 – Copan Fire4231a7D

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Bartlesville · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 50 (hex 32) · NAC 92E
Control 853.4625, 853.7625
Voice 851.975, 852.35, 852.8125, 853.15
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 154.1300 MHz, narrow FM, 67.0 PL.

Do fire departments and EMS use a trunked radio system in Washington County?

Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.4625, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Washington County are marked encrypted.