About Copan Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Copan: Washington County Fire 154.1300 MHz, narrow FM, 67.0 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Washington County Fire talkgroup 409 (hex 199).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Copan, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 11 miles away. Its control channels: 853.4625, 853.7625 MHz.
Data updated .
Copan conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Copan Fire | Copan Fire – Fire Ground | 154.3250 | 107.2 PL | FMN | WQQG537 |
Washington County channels that also cover Copan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Fire Tone Out | 154.1300 | 67.0 PL | FMN | WNAZ440 |
| Washington County Fire | County Fire | 154.3550 In 153.7700 | 107.2 PL | FMN | WNAZ440 |
| Washington County Fire | County Fire -South Repeater | 155.9250 In 158.9250 | 107.2 PL | FMN | WPPB912 |
| Washington County Fire | Fire UHF – Linked to 154.130 MHz | 453.2625 In 458.2625 | 263 DPL | FMN | WQAQ798 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oglesby Fire | Oglesby Fire – Fire Ground | 154.4300 In 158.8575 | 141.3 PL | FMN | WNPB236 |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington County Fire | County Rural Fire Dispatch | 409 | 199 | D |
| Washington County Fire | Fireground 2 – Bartlesville | 411 | 19b | D |
| Washington County Fire | Fireground 3 – Ochelata | 413 | 19d | D |
| Washington County Fire | Washington County Fire – Fire Ground | 415 | 19f | D |
| Washington County Fire | Washington County Fire – Fire Ground | 417 | 1a1 | D |
| Washington County Fire | Washington County Fire – Fire Ground | 419 | 1a3 | D |
| Washington County Fire | Washington County Fire – Fire Ground | 421 | 1a5 | D |
| Washington County Fire | Fireground 8 – Copan Fire | 423 | 1a7 | D |
Nearest trunked radio sites
Distances are measured from the center of Copan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Copan?
We do not have a fire dispatch channel listed specifically for Copan. The county-level fire dispatch channels in the same county: Washington County Fire 154.1300 MHz, narrow FM, 67.0 PL.
Do fire departments and EMS use a trunked radio system in Copan?
Yes. The county-level systems that cover Copan are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Copan?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Copan?
For Copan, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.4625, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Copan fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Copan are marked encrypted.