About Frederick Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Frederick: Tillman County Fire 154.4150 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Frederick: Tillman County EMS 155.1525 MHz, DMR, CC 15 · TG 38888 · SL 1.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Tillman County channels that also cover Frederick
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tillman County Fire | Fire / Emergency Management | 154.4150 In 153.9500 | 156.7 PL | FMN | WPAN650 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tillman County EMS | Tillman County EMS – Dispatch | 155.1525 In 158.9325 | CC 15 · TG 38888 · SL 1 | DMR | KNCN986 |
Nearest trunked radio sites
Distances are measured from the center of Frederick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Frederick?
We do not have a fire dispatch channel listed specifically for Frederick. The county-level fire dispatch channels in the same county: Tillman County Fire 154.4150 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Frederick?
We do not have a EMS dispatch channel listed specifically for Frederick. The county-level EMS dispatch channels in the same county: Tillman County EMS 155.1525 MHz, DMR, CC 15 · TG 38888 · SL 1.
What scanner do I need to listen to fire and EMS in Frederick?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Frederick?
For Frederick, start with the Baker Peak site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.