Skip to content

Elmer Fire and EMS Frequencies

We do not have frequencies listed specifically for Elmer in Jackson County, Oklahoma yet. Countywide channels for Jackson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mangum (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 26 miles away.

About Elmer Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Elmer: Jackson County Fire 154.1525 MHz, narrow FM, 88.5 PL. County-level ems dispatch that covers Elmer: Air Evac Medical Helicopters 159.7500 MHz, narrow FM, 114 DPL; Jackson County EMS 153.9350 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Jackson County channels that also cover Elmer

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireJackson County Fire – Dispatch154.1525
In 158.8350
88.5 PLFMNWQGL897

EMS Dispatch

EMS Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac -- Altus Base159.7500114 DPLFMNWQRZ623
Jackson County EMSAmbulance -- Mobile Repeaters153.9350FMNWQBA866
Jackson County EMSJackson County EMS – Dispatch155.2650
In 158.9400
131.8 PLFMNWQBA866

Nearest trunked radio sites

Distances are measured from the center of Elmer.

Mangum · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 42 (hex 2A) · NAC 929 · about 26 mi away
Control 858.7125, 859.7125
Voice 856.7125, 857.7125
Baker Peak · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 29 (hex 1D) · NAC 92A · about 40 mi away
Control 859.2625, 860.2625
Voice 856.2625, 857.2625, 858.2625
Lawton · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 3 (hex 3) · NAC 92A · about 55 mi away
Control 857.7125, 858.7125, 859.7125, 860.7125
Voice 851.2375, 851.4875, 853.2875, 853.5125, 853.5375, 853.7875, 856.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elmer?

We do not have a fire dispatch channel listed specifically for Elmer. The county-level fire dispatch channels in the same county: Jackson County Fire 154.1525 MHz, narrow FM, 88.5 PL.

What frequency does EMS or the ambulance service use in Elmer?

We do not have a EMS dispatch channel listed specifically for Elmer. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 159.7500 MHz, narrow FM, 114 DPL; Jackson County EMS 153.9350 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Elmer?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Elmer?

For Elmer, start with the Mangum site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 858.7125, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.