About Pottawatomie County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pottawatomie County: Pottawatomie County Fire 154.8900 MHz, narrow FM, no tone. Trunked: Oklahoma Multi-Agency Communications System (OMACS), for example Pottawatomie County Fire talkgroup 3551 (hex ddf).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pottawatomie County, start with the McLoud site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels: 770.50625 MHz.
Data updated .
Pottawatomie County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pottawatomie County Fire | County Fire -- Link to OKWIN | 154.8900 | FMN | KTY948 |
Pottawatomie County trunked talkgroups
Oklahoma Multi-Agency Communications System (OMACS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pottawatomie County Fire | Rural Fire Dispatch | 3551 | ddf | T |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pottawatomie County Fire | Pottawatomie County Fire – Dispatch | 3525 | dc5 | D |
Radio system sites in Pottawatomie County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pottawatomie County
Common questions
What frequency does the fire department use in Pottawatomie County?
Fire dispatch channels listed for Pottawatomie County: Pottawatomie County Fire 154.8900 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Pottawatomie County?
Yes. Fire and EMS talkgroups are listed for Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pottawatomie County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pottawatomie County?
For Pottawatomie County, start with the McLoud site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 770.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pottawatomie County fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Pottawatomie County are marked encrypted.
Are Pottawatomie County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Pottawatomie County are marked encrypted.