About Macomb Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Macomb: Pottawatomie County Fire 154.8900 MHz, narrow FM, no tone. Trunked: Oklahoma Multi-Agency Communications System (OMACS), for example Macomb Fire talkgroup 3529 (hex dc9).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Macomb, start with the Site on Wheels site of Oklahoma Multi-Agency Communications System (OMACS), about 7 miles away. Its control channels: 774.51875, 774.86875 MHz.
Data updated .
Macomb trunked talkgroups
Oklahoma Multi-Agency Communications System (OMACS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Macomb Fire | Macomb Fire – Dispatch | 3529 | dc9 | T |
Pottawatomie County channels that also cover Macomb
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pottawatomie County Fire | County Fire -- Link to OKWIN | 154.8900 | FMN | KTY948 |
Oklahoma Multi-Agency Communications System (OMACS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pottawatomie County Fire | Rural Fire Dispatch | 3551 | ddf | T |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pottawatomie County Fire | Pottawatomie County Fire – Dispatch | 3525 | dc5 | D |
Nearest trunked radio sites
Distances are measured from the center of Macomb.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Macomb?
We do not have a fire dispatch channel listed specifically for Macomb. The county-level fire dispatch channels in the same county: Pottawatomie County Fire 154.8900 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Macomb?
Yes. Fire and EMS talkgroups are listed for Oklahoma Multi-Agency Communications System (OMACS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Macomb?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Macomb?
For Macomb, start with the Site on Wheels site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 774.51875, 774.86875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Macomb fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Macomb are marked encrypted.