Skip to content

Osage County Fire and EMS Frequencies

Osage County in Oklahoma has 18 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Osage County Fire and EMS Frequencies

Quick answer: Fire dispatch for Osage County: Rural Fire Districts 151.2200 MHz, narrow FM, no tone. EMS dispatch for Osage County: Osage County EMS 461.6000 MHz, DMR, no tone. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Osage County Fire talkgroup 1493 (hex 5d5).

  • 17 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Osage County, start with the Hominy site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 853.6625, 853.9125 MHz.

Data updated .

Osage County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural Fire DistrictsMorgans Corner Volunteer Fire -- West of Skiatook151.2200
In 154.7250
FMNWQII828
Rural Fire DistrictsGreen Country Fire and EMS District – near Sand Springs151.3400
In 159.3075
CSQFMNWNSF415
Rural Fire DistrictsBarnsdall Area Rural Fire152.9450CSQFMNKNAI659
Rural Fire DistrictsCountry Corner Fire Page Out154.0400
In 155.9850
265 DPLFMWPSJ659
Rural Fire DistrictsBlackdog Fire District – Northwest of Tulsa, 58th St N at 57th W Ave154.1450
In 159.3375
141.3 PLFMNWPAF567
Rural Fire DistrictsOsage Hills Volunteer Fire- – Eastern Osage County154.1750FMNWNUM337
Rural Fire DistrictsPrue Volunteer Fire154.2050110.9 PLFMNWPWX780
Rural Fire DistrictsMcCord Community Volunteer Fire -- Southeast of Ponca City154.3400FMNWQVS792
Rural Fire DistrictsNelagoney Volunteer Fire -- Southeast of Pawhuska154.3400FMNWPTW261
Rural Fire DistrictsOsage Hills Volunteer Fire -- West of Bartlesville154.3850FMNWNMA387
Rural Fire DistrictsOsage Cove Volunteer Fire -- East of Ponca City154.4150FMNWPGD903
Rural Fire DistrictsHulah Volunteer Fire -- West of Copan155.4000100.0 PLFMNWPGA372
Rural Fire DistrictsAvant Fire155.5275FMNWQAW864
Rural Fire DistrictsPershing Fire Dispatch155.5500CSQFMN—
Rural Fire DistrictsBoulanger Fire158.7750
In 153.7400
FMNWQOD780
Rural Fire DistrictsRock Fire District – near Skiatook158.8200186.2 PLFMNWPBD224
Rural Fire DistrictsAvant Fire159.0975FMNWQAW864

EMS Dispatch

EMS Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Osage County EMSMercy EMS Dispatch461.6000
In 466.6000
DMRWQOH542

Osage County trunked talkgroups

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Osage County FireCountry Corner Fire14935d5D

Radio system sites in Osage County

Program the control channel first; your scanner finds the voice channels from it.

Hominy · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 69 (hex 45) · NAC 92E
Control 853.6625, 853.9125
Voice 851.0375, 851.35, 851.5625, 852.0375, 852.475, 852.95
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Osage County

Common questions

What frequency does the fire department use in Osage County?

Fire dispatch channels listed for Osage County: Rural Fire Districts 151.2200 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Osage County?

EMS dispatch channels listed for Osage County: Osage County EMS 461.6000 MHz, DMR, no tone.

Do fire departments and EMS use a trunked radio system in Osage County?

Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Osage County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Osage County?

For Osage County, start with the Hominy site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.6625, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Osage County fire and EMS frequencies encrypted?

None of the 18 conventional frequencies listed for Osage County are marked encrypted.

Are Osage County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Osage County are marked encrypted.