Skip to content

Barnsdall Fire and EMS Frequencies

Barnsdall in Osage County, Oklahoma has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Bartlesville (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 16 miles away.

About Barnsdall Fire and EMS Frequencies

Quick answer: Fire dispatch for Barnsdall: Barnsdall Fire 153.9950 MHz, narrow FM, no tone. EMS dispatch for Barnsdall: Barnsdall EMS 155.3550 MHz, narrow FM, no tone. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Osage County Fire talkgroup 1493 (hex 5d5).

  • 19 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Barnsdall, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 16 miles away. Its control channels: 853.4625, 853.7625 MHz.

Data updated .

Barnsdall conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Barnsdall
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barnsdall FireBarnsdall Fire – Dispatch153.9950
In 156.1500
FMNWPXJ775

EMS Dispatch

EMS Dispatch frequencies for Barnsdall
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barnsdall EMSBarnsdall EMS – Dispatch155.3550
In 150.7900
FMNWNHU997

Osage County channels that also cover Barnsdall

Fire Dispatch

Fire Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural Fire DistrictsMorgans Corner Volunteer Fire -- West of Skiatook151.2200
In 154.7250
FMNWQII828
Rural Fire DistrictsGreen Country Fire and EMS District – near Sand Springs151.3400
In 159.3075
CSQFMNWNSF415
Rural Fire DistrictsBarnsdall Area Rural Fire152.9450CSQFMNKNAI659
Rural Fire DistrictsCountry Corner Fire Page Out154.0400
In 155.9850
265 DPLFMWPSJ659
Rural Fire DistrictsBlackdog Fire District – Northwest of Tulsa, 58th St N at 57th W Ave154.1450
In 159.3375
141.3 PLFMNWPAF567
Rural Fire DistrictsOsage Hills Volunteer Fire- – Eastern Osage County154.1750FMNWNUM337
Rural Fire DistrictsPrue Volunteer Fire154.2050110.9 PLFMNWPWX780
Rural Fire DistrictsMcCord Community Volunteer Fire -- Southeast of Ponca City154.3400FMNWQVS792
Rural Fire DistrictsNelagoney Volunteer Fire -- Southeast of Pawhuska154.3400FMNWPTW261
Rural Fire DistrictsOsage Hills Volunteer Fire -- West of Bartlesville154.3850FMNWNMA387
Rural Fire DistrictsOsage Cove Volunteer Fire -- East of Ponca City154.4150FMNWPGD903
Rural Fire DistrictsHulah Volunteer Fire -- West of Copan155.4000100.0 PLFMNWPGA372
Rural Fire DistrictsAvant Fire155.5275FMNWQAW864
Rural Fire DistrictsPershing Fire Dispatch155.5500CSQFMN—
Rural Fire DistrictsBoulanger Fire158.7750
In 153.7400
FMNWQOD780
Rural Fire DistrictsRock Fire District – near Skiatook158.8200186.2 PLFMNWPBD224
Rural Fire DistrictsAvant Fire159.0975FMNWQAW864

EMS Dispatch

EMS Dispatch frequencies for Osage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Osage County EMSMercy EMS Dispatch461.6000
In 466.6000
DMRWQOH542

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Osage County FireCountry Corner Fire14935d5D

Nearest trunked radio sites

Distances are measured from the center of Barnsdall.

Bartlesville · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 50 (hex 32) · NAC 92E · about 16 mi away
Control 853.4625, 853.7625
Voice 851.975, 852.35, 852.8125, 853.15
Hominy · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 69 (hex 45) · NAC 92E · about 22 mi away
Control 853.6625, 853.9125
Voice 851.0375, 851.35, 851.5625, 852.0375, 852.475, 852.95
Owasso · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 73 (hex 49) · NAC 92D · about 26 mi away
Control 851.9625, 852.8875
Voice 851.4375, 851.6375, 852.2, 852.425, 852.6375, 853.3875, 853.6375, 853.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Barnsdall?

Fire dispatch channels listed for Barnsdall: Barnsdall Fire 153.9950 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Barnsdall?

EMS dispatch channels listed for Barnsdall: Barnsdall EMS 155.3550 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Barnsdall?

Yes. The county-level systems that cover Barnsdall are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Barnsdall?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Barnsdall?

For Barnsdall, start with the Bartlesville site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.4625, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Barnsdall fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Barnsdall are marked encrypted.