Skip to content

Purcell Fire and EMS Frequencies

Purcell in McClain County, Oklahoma has 1 conventional frequency and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Purcell (Oklahoma Multi-Agency Communications System (OMACS)), about 6 miles away.

Purcell also extends into Cleveland County.

About Purcell Fire and EMS Frequencies

Quick answer: Fire dispatch for Purcell: Purcell Fire 151.4600 MHz, DMR, CC 1 · TG 2000 · SL 1. Trunked: Oklahoma Multi-Agency Communications System (OMACS), for example Purcell Fire talkgroup 3683 (hex e63).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Multi-Agency Communications System (OMACS): 2 talkgroups; Oklahoma Multi-Agency Communications System (OMACS): 3 talkgroups; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Purcell, start with the Purcell site of Oklahoma Multi-Agency Communications System (OMACS), about 6 miles away. Its control channels: 772.25625, 772.50625 MHz.

Data updated .

Purcell conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Purcell
AgencyDescriptionFrequency (MHz)ToneModeFCC
Purcell FirePurcell Fire – Dispatch151.4600
In 159.2325
CC 1 · TG 2000 · SL 1DMRWQDB915

Purcell trunked talkgroups

Oklahoma Multi-Agency Communications System (OMACS)

Oklahoma Multi-Agency Communications System (OMACS) talkgroups
AgencyDescriptionTalkgroupHexMode
Purcell FirePurcell Fire – Dispatch3683e63T
Purcell FirePurcell Fire – Tactical Channel1091443T

McClain County channels that also cover Purcell

Fire Dispatch

Fire Dispatch frequencies for McClain County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McClain County FireMcClain County Fire – Dispatch159.1350
In 154.9200
051 DPLFMNKA4030

Oklahoma Multi-Agency Communications System (OMACS)

Oklahoma Multi-Agency Communications System (OMACS) talkgroups
AgencyDescriptionTalkgroupHexMode
McClain County FireCounty Fire Dispatch12794ffT
McClain County FireCounty Fire Tactical1095447T
McClain County EMSWadleys's EMS Dispatch1093445T

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
McClain County FireCounty Fire Dispatch12794ffD
McClain County EMSWadley's Ambulance Dispatch3859f13D

Nearest trunked radio sites

Distances are measured from the center of Purcell.

Purcell · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 6 (hex 6) · NAC 196 · about 6 mi away
Control 772.25625, 772.50625
Voice 771.18125, 771.43125, 771.78125
Slaughterville · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 9 (hex 9) · NAC 196 · about 10 mi away
Control 851.4125, 852.0625
Voice 852.8125, 853.4, 854.3125
Lexington · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 7 (hex 7) · NAC 92C · about 10 mi away
Control 859.4375, 860.4375
Voice 853.65, 856.4375, 857.4375, 858.4375, 859.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Purcell?

Fire dispatch channels listed for Purcell: Purcell Fire 151.4600 MHz, DMR, CC 1 · TG 2000 · SL 1.

Do fire departments and EMS use a trunked radio system in Purcell?

Yes. Fire and EMS talkgroups are listed for Oklahoma Multi-Agency Communications System (OMACS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Purcell?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Purcell?

For Purcell, start with the Purcell site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 772.25625, 772.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Purcell fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Purcell are marked encrypted.

Are Purcell fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Purcell are marked encrypted.