About Cleveland County Fire and EMS Frequencies
Quick answer: Fire dispatch for Cleveland County: Cleveland County Fire 159.3900 MHz, narrow FM, no tone; Rural Fire Distrticts 154.1525 MHz, narrow FM, 723 DPL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Cleveland County Fire talkgroup 1113 (hex 459).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cleveland County, start with the Simulcast site of Norman. Its control channels: 851.2125, 851.65, 852.1 MHz.
Data updated .
Cleveland County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cleveland County Fire | County Fire Dispatch Patched to OKWIN | 159.3900 In 154.4375 | FMN | WQVN227 | |
| Rural Fire Distrticts | Slaughterville Fire Dispatch Patched to OKWIN | 154.1525 In 158.9175 | 723 DPL | FMN | WQWE278 |
| Rural Fire Distrticts | Cedar Country Fire Dispatch | 158.7675 In 151.0100 | 243 DPL | FMN | WQVN227 |
Cleveland County trunked talkgroups
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cleveland County Fire | Cedar County Fire Dispatch | 1113 | 459 | D |
| Cleveland County Fire | Little Axe Fire Dispatch | 3017 | bc9 | D |
| Cleveland County Fire | Cleveland County Fire – Dispatch | 3019 | bcb | D |
| Cleveland County Fire | Metro Area Fire Auto-Aid | 3235 | ca3 | D |
Radio system sites in Cleveland County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cleveland County
Common questions
What frequency does the fire department use in Cleveland County?
Fire dispatch channels listed for Cleveland County: Cleveland County Fire 159.3900 MHz, narrow FM, no tone; Rural Fire Distrticts 154.1525 MHz, narrow FM, 723 DPL.
Do fire departments and EMS use a trunked radio system in Cleveland County?
Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cleveland County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cleveland County?
For Cleveland County, start with the Simulcast site of Norman. Its control channels are 851.2125, 851.65, 852.1, 853.275 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cleveland County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Cleveland County are marked encrypted.
Are Cleveland County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Cleveland County are marked encrypted.