Skip to content

McClain County Fire and EMS Frequencies

McClain County in Oklahoma has 1 countywide conventional frequency and 5 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About McClain County Fire and EMS Frequencies

Quick answer: Fire dispatch for McClain County: McClain County Fire 159.1350 MHz, narrow FM, 051 DPL. Trunked: Oklahoma Multi-Agency Communications System (OMACS), for example McClain County Fire talkgroup 1279 (hex 4ff).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Multi-Agency Communications System (OMACS): 3 talkgroups; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McClain County, start with the Purcell site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels: 772.25625, 772.50625 MHz.

Data updated .

McClain County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McClain County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McClain County FireMcClain County Fire – Dispatch159.1350
In 154.9200
051 DPLFMNKA4030

McClain County trunked talkgroups

Oklahoma Multi-Agency Communications System (OMACS)

Oklahoma Multi-Agency Communications System (OMACS) talkgroups
AgencyDescriptionTalkgroupHexMode
McClain County FireCounty Fire Dispatch12794ffT
McClain County FireCounty Fire Tactical1095447T
McClain County EMSWadleys's EMS Dispatch1093445T

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
McClain County FireCounty Fire Dispatch12794ffD
McClain County EMSWadley's Ambulance Dispatch3859f13D

Radio system sites in McClain County

Program the control channel first; your scanner finds the voice channels from it.

Purcell · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 6 (hex 6) · NAC 196
Control 772.25625, 772.50625
Voice 771.18125, 771.43125, 771.78125
Dibble · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 7 (hex 7) · NAC 196
Control 771.19375, 771.44375
Voice 771.79375, 772.26875, 772.51875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McClain County

Common questions

What frequency does the fire department use in McClain County?

Fire dispatch channels listed for McClain County: McClain County Fire 159.1350 MHz, narrow FM, 051 DPL.

Do fire departments and EMS use a trunked radio system in McClain County?

Yes. Fire and EMS talkgroups are listed for Oklahoma Multi-Agency Communications System (OMACS): 3 talkgroups; Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McClain County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in McClain County?

For McClain County, start with the Purcell site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 772.25625, 772.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McClain County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for McClain County are marked encrypted.

Are McClain County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for McClain County are marked encrypted.