Skip to content

Crescent Fire and EMS Frequencies

Crescent in Logan County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Guthrie (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 12 miles away.

About Crescent Fire and EMS Frequencies

Quick answer: Fire dispatch for Crescent: Crescent Fire 158.8350 MHz, narrow FM, 146.2 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Logan County Fire talkgroup 197 (hex c5).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crescent, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 12 miles away. Its control channels: 859.2375, 860.2375 MHz.

Data updated .

Crescent conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crescent
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crescent FireCrescent Fire Tone Out and Storm Siren Activation158.8350
In 155.0100
146.2 PLFMNKNEL354

Logan County channels that also cover Crescent

Fire Dispatch

Fire Dispatch frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County FireCounty Fire Dispatch155.8650
In 153.7850
94.8 PLFMNKNEM454

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Logan County FireCounty Fire Dispatch197c5D
Logan County FireCounty Fire – Fireground138756bD
Logan County FireCounty Fire – Fireground138956dD
Logan County FireCounty Fire – Fireground3267cc3D

Nearest trunked radio sites

Distances are measured from the center of Crescent.

Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 12 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
North OKC · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 2 (hex 2) · NAC 196 · about 27 mi away
Control 771.48125, 772.10625
Voice 770.05625, 770.55625, 772.98125, 773.63125, 774.13125, 774.68125
Simulcast · Oklahoma City Metro Public Safety
RFSS 10 · Site 10 (hex A) · NAC 00A · about 30 mi away
Control 851.1, 851.1875, 851.3875, 851.7375, 851.8625, 851.9875, 852.0375, 852.175, 852.2625, 852.3625, 852.425, 852.475, 852.5625, 852.6375, 852.6625, 852.8625, 852.9, 853.0625, 853.2, 853.3, 853.425, 853.6, 853.8, 853.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Crescent?

Fire dispatch channels listed for Crescent: Crescent Fire 158.8350 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Crescent?

Yes. The county-level systems that cover Crescent are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crescent?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crescent?

For Crescent, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2375, 860.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crescent fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Crescent are marked encrypted.