Skip to content

Dover Fire and EMS Frequencies

We do not have frequencies listed specifically for Dover in Kingfisher County, Oklahoma yet. Countywide channels for Kingfisher County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Enid (Enid), about 29 miles away.

About Dover Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Dover: Kingfisher County Fire 156.2175 MHz, narrow FM, 114 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Kingfisher County channels that also cover Dover

Fire Dispatch

Fire Dispatch frequencies for Kingfisher County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kingfisher County FireKingfisher County Fire – Dispatch156.2175
In 151.0775
114 DPLFMNWQXV201

Nearest trunked radio sites

Distances are measured from the center of Dover.

Enid · Enid
Site 1 (hex 1) · about 29 mi away
Control 154.0625
Voice 154.0325, 154.7475, 154.7625, 154.9725
Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 30 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
Geary · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 9 (hex 9) · NAC 92C · about 36 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Dover?

We do not have a fire dispatch channel listed specifically for Dover. The county-level fire dispatch channels in the same county: Kingfisher County Fire 156.2175 MHz, narrow FM, 114 DPL.

What scanner do I need to listen to fire and EMS in Dover?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dover?

For Dover, start with the Enid site of Enid. Its control channels are 154.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.