About Ryan Fire and EMS Frequencies
Quick answer: Fire dispatch for Ryan: Ryan Fire 154.2200 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Ryan conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ryan Fire | Dispatch and Paging | 154.2200 In 150.8050 | FMN | WQHR963 |
Jefferson County channels that also cover Ryan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Fire and EMS Dispatch | 154.1750 In 159.0600 | 123.0 PL | FMN | WQBP918 |
Nearest trunked radio sites
Distances are measured from the center of Ryan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Ryan?
Fire dispatch channels listed for Ryan: Ryan Fire 154.2200 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Ryan?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Ryan?
For Ryan, start with the Walters site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.7375, 860.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ryan fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Ryan are marked encrypted.