Skip to content

Hollis Fire and EMS Frequencies

Hollis in Harmon County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Mangum (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 23 miles away.

About Hollis Fire and EMS Frequencies

Quick answer: Fire dispatch for Hollis: Hollis Fire 154.9650 MHz, narrow FM, 173.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Hollis conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hollis
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hollis FireHollis Fire – Dispatch154.9650
In 158.9550
173.8 PLFMNWSBV848

Nearest trunked radio sites

Distances are measured from the center of Hollis.

Mangum · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 42 (hex 2A) · NAC 929 · about 23 mi away
Control 858.7125, 859.7125
Voice 856.7125, 857.7125
Elk City · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 43 (hex 2B) · NAC 929 · about 59 mi away
Control 856.2125, 857.2125
Voice 852.5375, 852.9625, 853.9875, 855.2125
Baker Peak · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 29 (hex 1D) · NAC 92A · about 64 mi away
Control 859.2625, 860.2625
Voice 856.2625, 857.2625, 858.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hollis?

Fire dispatch channels listed for Hollis: Hollis Fire 154.9650 MHz, narrow FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Hollis?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hollis?

For Hollis, start with the Mangum site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 858.7125, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hollis fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Hollis are marked encrypted.