Skip to content

Renfrow Fire and EMS Frequencies

We do not have frequencies listed specifically for Renfrow in Grant County, Oklahoma yet. Countywide channels for Grant County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Blackwell (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 18 miles away.

About Renfrow Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Renfrow: Grant County Fire 154.2650 MHz, narrow FM, 192.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Grant County channels that also cover Renfrow

Fire Dispatch

Fire Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FireTri County Fire and Emergency Management (Grant, Alfalfa and Garfield Counties)154.2650
In 153.8300
192.8 PLFMNWPKF871
Grant County FireFire and EMS Tone Out154.4300
In 159.0900
91.5 PLFMNWQDG481
Grant County FireFire and EMS Dispatch154.4300
In 159.0900
RAN 11NXDN48WQDG481

Nearest trunked radio sites

Distances are measured from the center of Renfrow.

Blackwell · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 12 (hex C) · NAC 92E · about 18 mi away
Control 852.0875, 852.5875
Voice 851.45, 853.2625, 853.775
Enid · Enid
Site 1 (hex 1) · about 39 mi away
Control 154.0625
Voice 154.0325, 154.7475, 154.7625, 154.9725
Payne County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 49 (hex 31) · NAC 920 · about 71 mi away
Control 774.34375, 774.59375, 774.84375
Voice 773.59375, 773.84375, 774.09375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Renfrow?

We do not have a fire dispatch channel listed specifically for Renfrow. The county-level fire dispatch channels in the same county: Grant County Fire 154.2650 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Renfrow?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Renfrow?

For Renfrow, start with the Blackwell site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.0875, 852.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.