Skip to content

Hunter Fire and EMS Frequencies

We do not have frequencies listed specifically for Hunter in Garfield County, Oklahoma yet. Countywide channels for Garfield County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Enid (Enid), about 17 miles away.

About Hunter Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hunter: Garfield County Fire 151.3025 MHz, NXDN48, RAN 2.

  • 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Garfield County channels that also cover Hunter

Fire Dispatch

Fire Dispatch frequencies for Garfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Garfield County FireGarfield County Fire – Dispatch151.3025
In 159.3375
RAN 2NXDN48WQUZ292

EMS Tactical

EMS Tactical frequencies for Garfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Garfield County EMSMercy Reional EMS – Car-to-Car155.1600RAN 1NXDN48WPXC776

Nearest trunked radio sites

Distances are measured from the center of Hunter.

Enid · Enid
Site 1 (hex 1) · about 17 mi away
Control 154.0625
Voice 154.0325, 154.7475, 154.7625, 154.9725
Blackwell · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 12 (hex C) · NAC 92E · about 27 mi away
Control 852.0875, 852.5875
Voice 851.45, 853.2625, 853.775
Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 47 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hunter?

We do not have a fire dispatch channel listed specifically for Hunter. The county-level fire dispatch channels in the same county: Garfield County Fire 151.3025 MHz, NXDN48, RAN 2.

What scanner do I need to listen to fire and EMS in Hunter?

A scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Hunter?

For Hunter, start with the Enid site of Enid. Its control channels are 154.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.