About Craig County Fire and EMS Frequencies
Quick answer: Fire dispatch for Craig County: Craig County Fire 154.1300 MHz, narrow FM, 146.2 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Craig County Fire talkgroup 1661 (hex 67d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Craig County, start with the Vinita site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 852.0875, 852.5875 MHz.
Data updated .
Craig County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Craig County Fire | County Fire Dispatch | 154.1300 | 146.2 PL | FMN | WQBP849 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oklahoma Forensic Center | Hospital Fire Dispatch | 155.2050 | FMN | KYU568 | |
| Oklahoma Forensic Center | Hospital Operations | 155.3250 | FMN | KB43356 |
Craig County trunked talkgroups
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Craig County Fire | Craig County Fire – Dispatch | 1661 | 67d | D |
| Craig County EMS | Mercy EMS Dispatch | 1659 | 67b | D |
Radio system sites in Craig County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Craig County
Common questions
What frequency does the fire department use in Craig County?
Fire dispatch channels listed for Craig County: Craig County Fire 154.1300 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Craig County?
Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Craig County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Craig County?
For Craig County, start with the Vinita site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.0875, 852.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Craig County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Craig County are marked encrypted.
Are Craig County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Craig County are marked encrypted.