About Bluejacket Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bluejacket: Craig County Fire 154.1300 MHz, narrow FM, 146.2 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Craig County Fire talkgroup 1661 (hex 67d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bluejacket, start with the Grove site of Ottawa County Public Safety, about 15 miles away. Its control channels: 858.05 MHz.
Data updated .
Craig County channels that also cover Bluejacket
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Craig County Fire | County Fire Dispatch | 154.1300 | 146.2 PL | FMN | WQBP849 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oklahoma Forensic Center | Hospital Fire Dispatch | 155.2050 | FMN | KYU568 | |
| Oklahoma Forensic Center | Hospital Operations | 155.3250 | FMN | KB43356 |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Craig County Fire | Craig County Fire – Dispatch | 1661 | 67d | D |
| Craig County EMS | Mercy EMS Dispatch | 1659 | 67b | D |
Nearest trunked radio sites
Distances are measured from the center of Bluejacket.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bluejacket?
We do not have a fire dispatch channel listed specifically for Bluejacket. The county-level fire dispatch channels in the same county: Craig County Fire 154.1300 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Bluejacket?
Yes. The county-level systems that cover Bluejacket are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bluejacket?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bluejacket?
For Bluejacket, start with the Grove site of Ottawa County Public Safety. Its control channels are 858.05 MHz. Program a control channel first; the scanner finds the voice channels from it.