Skip to content

Caddo County Fire and EMS Frequencies

Caddo County in Oklahoma has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Caddo County Fire and EMS Frequencies

Quick answer: Fire dispatch for Caddo County: Caddo County Fire 154.2950 MHz, narrow FM, 165 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Caddo County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Caddo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Caddo County FireCaddo County Fire – Dispatch154.2950
In 158.9850
165 DPLFMNWQIP523

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Caddo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Caddo County FireCaddo County Fire – Fire Ground154.0100FMN—

Fire Talk-around

Fire Talk-around frequencies for Caddo County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Multi-County Fire CorpsFire Corps Dispatch151.8500CC 1 · TG * · SL 1DMR—
Multi-County Fire CorpsFire Corps Car-to-Car152.9750FMN—

Radio system sites in Caddo County

Program the control channel first; your scanner finds the voice channels from it.

Anadarko · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 45 (hex 2D) · NAC 92A
Control 853.5875, 853.85
Voice 851.45, 852.225, 852.4, 853.225
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Caddo County

Common questions

What frequency does the fire department use in Caddo County?

Fire dispatch channels listed for Caddo County: Caddo County Fire 154.2950 MHz, narrow FM, 165 DPL.

What scanner do I need to listen to fire and EMS in Caddo County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Caddo County?

For Caddo County, start with the Anadarko site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.5875, 853.85 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Caddo County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Caddo County are marked encrypted.