About Cement Fire and EMS Frequencies
Quick answer: Fire dispatch for Cement: Cement Fire 155.2650 MHz, narrow FM, 411 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Cement conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cement Fire | Cement Fire – Dispatch | 155.2650 In 153.8600 | 411 DPL | FMN | WQTV742 |
Caddo County channels that also cover Cement
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Caddo County Fire | Caddo County Fire – Dispatch | 154.2950 In 158.9850 | 165 DPL | FMN | WQIP523 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Caddo County Fire | Caddo County Fire – Fire Ground | 154.0100 | FMN | — |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Multi-County Fire Corps | Fire Corps Dispatch | 151.8500 | CC 1 · TG * · SL 1 | DMR | — |
| Multi-County Fire Corps | Fire Corps Car-to-Car | 152.9750 | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Cement.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cement?
Fire dispatch channels listed for Cement: Cement Fire 155.2650 MHz, narrow FM, 411 DPL.
What scanner do I need to listen to fire and EMS in Cement?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Cement?
For Cement, start with the Anadarko site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.5875, 853.85 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cement fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Cement are marked encrypted.