Skip to content

Beckham County Fire and EMS Frequencies

Beckham County in Oklahoma has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 10 cities and communities below for local fire departments and EMS agencies.

About Beckham County Fire and EMS Frequencies

Quick answer: Fire dispatch for Beckham County: Beckham County Fire 154.2575 MHz, DMR, CC 8 · TG 1055 · SL 1. EMS dispatch for Beckham County: Air Evac Medical Helicopters 158.3700 MHz, narrow FM, 051 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Beckham County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Beckham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beckham County FireCounty Rural (Delhi) Fire154.2575
In 158.8950
CC 8 · TG 1055 · SL 1DMRWQZX809

EMS Dispatch

EMS Dispatch frequencies for Beckham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac -- Elk City Base158.3700051 DPLFMNWQGH465

Radio system sites in Beckham County

Program the control channel first; your scanner finds the voice channels from it.

Elk City · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 43 (hex 2B) · NAC 929
Control 856.2125, 857.2125
Voice 852.5375, 852.9625, 853.9875, 855.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Beckham County

Common questions

What frequency does the fire department use in Beckham County?

Fire dispatch channels listed for Beckham County: Beckham County Fire 154.2575 MHz, DMR, CC 8 · TG 1055 · SL 1.

What frequency does EMS or the ambulance service use in Beckham County?

EMS dispatch channels listed for Beckham County: Air Evac Medical Helicopters 158.3700 MHz, narrow FM, 051 DPL.

What scanner do I need to listen to fire and EMS in Beckham County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Beckham County?

For Beckham County, start with the Elk City site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 856.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Beckham County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Beckham County are marked encrypted.