Skip to content

Erick Fire and EMS Frequencies

We do not have frequencies listed specifically for Erick in Beckham County, Oklahoma yet. Countywide channels for Beckham County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elk City (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 28 miles away.

About Erick Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Erick: Beckham County Fire 154.2575 MHz, DMR, CC 8 · TG 1055 · SL 1. County-level ems dispatch that covers Erick: Air Evac Medical Helicopters 158.3700 MHz, narrow FM, 051 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Beckham County channels that also cover Erick

Fire Dispatch

Fire Dispatch frequencies for Beckham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Beckham County FireCounty Rural (Delhi) Fire154.2575
In 158.8950
CC 8 · TG 1055 · SL 1DMRWQZX809

EMS Dispatch

EMS Dispatch frequencies for Beckham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Air Evac Medical HelicoptersAir Evac -- Elk City Base158.3700051 DPLFMNWQGH465

Nearest trunked radio sites

Distances are measured from the center of Erick.

Elk City · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 43 (hex 2B) · NAC 929 · about 28 mi away
Control 856.2125, 857.2125
Voice 852.5375, 852.9625, 853.9875, 855.2125
Mangum · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 42 (hex 2A) · NAC 929 · about 33 mi away
Control 858.7125, 859.7125
Voice 856.7125, 857.7125
Weatherford · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 44 (hex 2C) · NAC 929 · about 65 mi away
Control 859.9875, 860.9875
Voice 855.9875, 856.9875, 857.9875, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Erick?

We do not have a fire dispatch channel listed specifically for Erick. The county-level fire dispatch channels in the same county: Beckham County Fire 154.2575 MHz, DMR, CC 8 · TG 1055 · SL 1.

What frequency does EMS or the ambulance service use in Erick?

We do not have a EMS dispatch channel listed specifically for Erick. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 158.3700 MHz, narrow FM, 051 DPL.

What scanner do I need to listen to fire and EMS in Erick?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Erick?

For Erick, start with the Elk City site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 856.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.