About Seneca County Police Frequencies
Quick answer: Dispatch for Seneca County: Seneca Co Sheriff Dispatch 453.2375 MHz, NXDN96, RAN 31. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Seneca County State Corrections talkgroup 52895 (hex ce9f).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Seneca County, start with the Attica site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 770.95625, 771.08125 MHz.
Data updated .
Seneca County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seneca Co Sheriff Dispatch | Seneca Co Sheriff Dispatch | 453.2375 In 458.2375 | RAN 31 | NXDN96 | WQKH541 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seneca County Sheriff | Seneca Co Jail | 453.1625 In 458.1625 | 274 DPL | FMN | WQOE253 |
Seneca County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Seneca County State Corrections | Adult Parole Authority – Seneca Unit | 52895 | ce9f | D |
Radio system sites in Seneca County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Seneca County
Common questions
What frequency do the police use in Seneca County?
Dispatch channels listed for Seneca County: Seneca Co Sheriff Dispatch 453.2375 MHz, NXDN96, RAN 31.
What is the sheriff's dispatch frequency in Seneca County?
Seneca Co Sheriff Dispatch 453.2375 MHz, NXDN96, RAN 31.
Do the police use a trunked radio system in Seneca County?
Yes. Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Seneca County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Seneca County?
For Seneca County, start with the Attica site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 770.95625, 771.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Seneca County police frequencies encrypted?
None of the 2 conventional frequencies listed for Seneca County are marked encrypted.
Are Seneca County police talkgroups encrypted?
None of the 1 talkgroups listed for Seneca County are marked encrypted.