About Bascom Police Frequencies
Quick answer: County-level dispatch that covers Bascom: Seneca Co Sheriff Dispatch 453.2375 MHz, NXDN96, RAN 31. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Seneca County State Corrections talkgroup 52895 (hex ce9f).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bascom, start with the Tiffin site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 7 miles away. Its control channels: 774.13125, 774.53125 MHz.
Data updated .
Seneca County channels that also cover Bascom
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seneca Co Sheriff Dispatch | Seneca Co Sheriff Dispatch | 453.2375 In 458.2375 | RAN 31 | NXDN96 | WQKH541 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seneca County Sheriff | Seneca Co Jail | 453.1625 In 458.1625 | 274 DPL | FMN | WQOE253 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Seneca County State Corrections | Adult Parole Authority – Seneca Unit | 52895 | ce9f | D |
Nearest trunked radio sites
Distances are measured from the center of Bascom.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Bascom?
We do not have a dispatch channel listed specifically for Bascom. The county sheriff's dispatch channels in the same county: Seneca Co Sheriff Dispatch 453.2375 MHz, NXDN96, RAN 31.
Do the police use a trunked radio system in Bascom?
Yes. The county-level systems that cover Bascom are Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Bascom?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bascom?
For Bascom, start with the Tiffin site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.13125, 774.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.