Skip to content

Portage County Fire and EMS Frequencies

Portage County in Ohio has 5 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 26 cities and communities below for local fire departments and EMS agencies.

About Portage County Fire and EMS Frequencies

Quick answer: Fire dispatch for Portage County: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL. EMS dispatch for Portage County: EMS Agencies 154.0100 MHz, FM, 151.4 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Portage County Fire talkgroup 40533 (hex 9e55).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Portage County, start with the Shalersville site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 772.70625, 773.58125 MHz.

Data updated .

Portage County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Portage County FireDeerfield/Windham/Paris/Brimfield/Palmyra/Edinburg Fire Dispatch151.4750
In 158.8950
210.7 PLFMN—
Portage County FireHiram/Garrettsville Freedom Nelson JFD Dispatch154.0100
In 159.2550
151.4 PLFMKVP666
Randolph Twp Fire DispatchRandolph Twp Fire Dispatch154.8000
In 159.1200
152 DPLFMNKUZ770
Suffield Twp Fire DispatchSuffield Twp Fire Dispatch153.8000
In 159.4200
141.3 PLFMKNCR991

EMS Dispatch

EMS Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesCommunity Ambulance154.0100
In 159.2550
151.4 PLFM—

Portage County trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Portage County FireRavenna Twp / Atwater / Windham Fire Alert405339e55D
Portage County FireRavenna City Fire Dispatch405439e5fD
Portage County FireParis / Palmyra / Edinburg / Charlestown Fire Dispatch405509e66D
Portage County FireRavenna City / Ravenna Twp Fire Alert405719e7bD
Portage County FireRavenna Twp Fire Alert405729e7cD
Portage County FireAtwater / Ravenna Twp / Windham Fire Dispatch405759e7fD
Portage County HospitalUHHS Portage Medical Center59814e9a6D

Radio system sites in Portage County

Program the control channel first; your scanner finds the voice channels from it.

Shalersville · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 20 (hex 14) · NAC 343
Control 772.70625, 773.58125
Voice 769.45625, 771.00625, 771.38125, 773.33125, 851.625, 852.825, 853.325
Portage County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 22 (hex 16) · NAC 34E
Control 772.70625, 773.33125, 773.58125, 773.73125
Voice 771.38125, 772.38125, 851.125, 851.425, 852.3875, 853.2125, 853.5875, 853.8
NEOMED (Rootstown) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 59 (hex 3B) · NAC 34A
Control 773.15625, 773.73125
Voice 769.60625, 769.95625, 772.38125, 852.7625, 853.9875
KSU (Kent) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 69 (hex 45) · NAC 340
Control 853.5, 856.2625
Voice 851.3625, 852.7375, 853.05, 853.8, 856.7125, 858.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Portage County

Common questions

What frequency does the fire department use in Portage County?

Fire dispatch channels listed for Portage County: Portage County Fire 151.4750 MHz, narrow FM, 210.7 PL; Randolph Twp Fire Dispatch 154.8000 MHz, narrow FM, 152 DPL; Suffield Twp Fire Dispatch 153.8000 MHz, FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Portage County?

EMS dispatch channels listed for Portage County: EMS Agencies 154.0100 MHz, FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Portage County?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Portage County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Portage County?

For Portage County, start with the Shalersville site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.70625, 773.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Portage County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Portage County are marked encrypted.

Are Portage County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Portage County are marked encrypted.