Skip to content

Aurora Fire and EMS Frequencies

Aurora in Portage County, Ohio has 1 conventional frequency and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Chagrin Falls (GCRCN (Greater Cleveland Radio Communications Network)), about 8 miles away.

About Aurora Fire and EMS Frequencies

Quick answer: Fire dispatch for Aurora: Aurora Fire Dispatch 154.2950 MHz, narrow FM, 131 DPL. County-level ems dispatch that covers Aurora: EMS Agencies 154.0100 MHz, FM, 151.4 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Aurora Fire talkgroup 64144 (hex fa90).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Aurora, start with the Chagrin Falls site of GCRCN (Greater Cleveland Radio Communications Network), about 8 miles away. Its control channels: 854.2875, 855.2375 MHz.

Data updated .

Aurora conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Aurora
AgencyDescriptionFrequency (MHz)ToneModeFCC
Aurora Fire DispatchAurora Fire Dispatch (MARCS-IP Simulcast)154.2950
In 156.0900
131 DPLFMNKBR482

Aurora trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Aurora FireAurora Fire Dispatch64144fa90D
Aurora FireAurora Fire Tactical405269e4eD

Portage County channels that also cover Aurora

Fire Dispatch

Fire Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Portage County FireDeerfield/Windham/Paris/Brimfield/Palmyra/Edinburg Fire Dispatch151.4750
In 158.8950
210.7 PLFMN—
Portage County FireHiram/Garrettsville Freedom Nelson JFD Dispatch154.0100
In 159.2550
151.4 PLFMKVP666
Randolph Twp Fire DispatchRandolph Twp Fire Dispatch154.8000
In 159.1200
152 DPLFMNKUZ770
Suffield Twp Fire DispatchSuffield Twp Fire Dispatch153.8000
In 159.4200
141.3 PLFMKNCR991

EMS Dispatch

EMS Dispatch frequencies for Portage County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesCommunity Ambulance154.0100
In 159.2550
151.4 PLFM—

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Portage County FireRavenna City Fire Dispatch405439e5fD
Portage County FireRavenna City / Ravenna Twp Fire Alert405719e7bD
Portage County FireRavenna Twp Fire Alert405729e7cD
Portage County HospitalUHHS Portage Medical Center59814e9a6D

Nearest trunked radio sites

Distances are measured from the center of Aurora.

Chagrin Falls · GCRCN (Greater Cleveland Radio Communications Network)
RFSS 1 · Site 3 (hex 3) · NAC 493 · about 8 mi away
Control 854.2875, 855.2375
Voice 853.2375
Shalersville · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 20 (hex 14) · NAC 343 · about 8 mi away
Control 772.70625, 773.58125
Voice 769.45625, 771.00625, 771.38125, 773.33125, 851.625, 852.825, 853.325
KSU (Kent) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 69 (hex 45) · NAC 340 · about 11 mi away
Control 853.5, 856.2625
Voice 851.3625, 852.7375, 853.05, 853.8, 856.7125, 858.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Aurora?

Fire dispatch channels listed for Aurora: Aurora Fire Dispatch 154.2950 MHz, narrow FM, 131 DPL.

What frequency does EMS or the ambulance service use in Aurora?

We do not have a EMS dispatch channel listed specifically for Aurora. The county-level EMS dispatch channels in the same county: EMS Agencies 154.0100 MHz, FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Aurora?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Aurora?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Aurora?

For Aurora, start with the Chagrin Falls site of GCRCN (Greater Cleveland Radio Communications Network). Its control channels are 854.2875, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Aurora fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Aurora are marked encrypted.

Are Aurora fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Aurora are marked encrypted.