About Meigs County Police Frequencies
Quick answer: Dispatch for Meigs County: Meigs County Sheriff 39.6200 MHz, FM, 103.5 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Meigs County Sheriff talkgroup 33007 (hex 80ef).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Meigs County, start with the McKenzie Ridge (Racine) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 770.83125, 771.95625 MHz.
Data updated .
Meigs County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Sheriff | Meigs Co Twp/Village Police Department dispatch | 39.6200 In 39.2600 | 103.5 PL | FM | KQB230 |
| Meigs County Sheriff | Meigs Co Sheriff's Office Dispatch | 460.0500 In 465.0500 | 731 DPL | FM | WPTA617 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Sheriff | Meigs County Juvenile Court | 155.7600 In 153.7400 | 203.5 PL | FM | KNAG574 |
Meigs County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meigs County Sheriff | Mutual Aid / Tactical | 33007 | 80ef | D |
| Meigs County Sheriff | Meigs County Sheriff – Dispatch | 54837 | d635 | D |
Radio system sites in Meigs County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Meigs County
Common questions
What frequency do the police use in Meigs County?
Dispatch channels listed for Meigs County: Meigs County Sheriff 39.6200 MHz, FM, 103.5 PL.
What is the sheriff's dispatch frequency in Meigs County?
Meigs County Sheriff 39.6200 MHz, FM, 103.5 PL.
Do the police use a trunked radio system in Meigs County?
Yes. Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Meigs County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Meigs County?
For Meigs County, start with the McKenzie Ridge (Racine) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 770.83125, 771.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Meigs County police frequencies encrypted?
None of the 3 conventional frequencies listed for Meigs County are marked encrypted.
Are Meigs County police talkgroups encrypted?
None of the 2 talkgroups listed for Meigs County are marked encrypted.