About Meigs County Fire and EMS Frequencies
Quick answer: Fire dispatch for Meigs County: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Meigs County Fire talkgroup 33003 (hex 80eb).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Meigs County, start with the McKenzie Ridge (Racine) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 770.83125, 771.95625 MHz.
Data updated .
Meigs County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Fire - Chester tower | Meigs County Fire – Chester tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
| Meigs County Fire - Longbottom tower | Meigs County Fire – Longbottom tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
| Meigs County Fire - Pomeroy tower | Meigs County Fire – Pomeroy tower | 453.1000 In 458.1000 | 023 DPL | FM | WNZR611 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meigs County Fire | Meigs Co EMA | 453.9250 In 458.9250 | 054 DPL | FM | WPFX411 |
Meigs County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meigs County Fire | Meigs County Fire – Dispatch | 33003 | 80eb | D |
| Meigs County Fire | Meigs County Fire – Tactical Channel / Operations | 33016 | 80f8 | D |
| Meigs County EMS | Meigs County EMS – Dispatch | 33000 | 80e8 | D |
| Meigs County EMS | Meigs County EMS – Alternate | 33009 | 80f1 | D |
Radio system sites in Meigs County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Meigs County
Common questions
What frequency does the fire department use in Meigs County?
Fire dispatch channels listed for Meigs County: Meigs County Fire - Chester tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Longbottom tower 453.1000 MHz, FM, 023 DPL; Meigs County Fire - Pomeroy tower 453.1000 MHz, FM, 023 DPL.
Do fire departments and EMS use a trunked radio system in Meigs County?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Meigs County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Meigs County?
For Meigs County, start with the McKenzie Ridge (Racine) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 770.83125, 771.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Meigs County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Meigs County are marked encrypted.
Are Meigs County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Meigs County are marked encrypted.