Skip to content

Dunn County Fire and EMS Frequencies

Dunn County in North Dakota has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Dunn County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dunn County: Dunn County Fire 159.0900 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Dunn County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dunn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dunn County FireCounty Fire Dispatch159.0900
In 153.8750
FMNWPMP854

Radio system sites in Dunn County

Program the control channel first; your scanner finds the voice channels from it.

Killdeer · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 25 (hex 19) · NAC A68
Control 853.4375, 853.8875
Voice 853.2125
Halliday · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 75 (hex 4B) · NAC A67
Control 853.5875, 853.8125
Voice 853.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dunn County

Common questions

What frequency does the fire department use in Dunn County?

Fire dispatch channels listed for Dunn County: Dunn County Fire 159.0900 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Dunn County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dunn County?

For Dunn County, start with the Killdeer site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.4375, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dunn County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Dunn County are marked encrypted.