Skip to content

Killdeer Fire and EMS Frequencies

We do not have frequencies listed specifically for Killdeer in Dunn County, North Dakota yet. Countywide channels for Dunn County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Killdeer (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 12 miles away.

About Killdeer Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Killdeer: Dunn County Fire 159.0900 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Dunn County channels that also cover Killdeer

Fire Dispatch

Fire Dispatch frequencies for Dunn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dunn County FireCounty Fire Dispatch159.0900
In 153.8750
FMNWPMP854

Nearest trunked radio sites

Distances are measured from the center of Killdeer.

Killdeer · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 25 (hex 19) · NAC A68 · about 12 mi away
Control 853.4375, 853.8875
Voice 853.2125
Halliday · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 75 (hex 4B) · NAC A67 · about 23 mi away
Control 853.5875, 853.8125
Voice 853.3625
Dickinson Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 5 (hex 5) · NAC A64 · about 33 mi away
Control 853.6375, 853.8625
Voice 853.1875, 853.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Killdeer?

We do not have a fire dispatch channel listed specifically for Killdeer. The county-level fire dispatch channels in the same county: Dunn County Fire 159.0900 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Killdeer?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Killdeer?

For Killdeer, start with the Killdeer site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.4375, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.