Skip to content

Pine Level Fire and EMS Frequencies

We do not have frequencies listed specifically for Pine Level in Johnston County, North Carolina yet. Countywide channels for Johnston County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Smithfield (Johnston County), about 2 miles away.

About Pine Level Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pine Level: Johnston County Fire 154.3400 MHz, FM, CSQ. Trunked: Johnston County, for example Johnston County Fire talkgroup 1002 (hex 3ea).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Johnston County: 24 talkgroups; North Carolina VIPER: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Pine Level, start with the Smithfield site of Johnston County, about 2 miles away. Its control channels: 851.225, 851.725, 852.2 MHz.

Data updated .

Johnston County channels that also cover Pine Level

Fire Dispatch

Fire Dispatch frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County FireJohnston County Fire/EMS Dispatch154.3400CSQFMWPNR820

Fire Talk-around

Fire Talk-around frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County FireJohnston County State Fire154.2800110.9 PLFMWPNR820

EMS Tactical

EMS Tactical frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County EMSJohnston County State Ems155.2800110.9 PLFMWZX463

Johnston County

Johnston County talkgroups
AgencyDescriptionTalkgroupHexMode
Johnston County FireFire Call10023eaT
Johnston County FireFire Paging1031407T
Bentonville FireBentonville Fire – Fire Ground103840eT
County Emergency ManagementEmergency Services10013e9T
Johnston County FireFire Common10033ebT
Johnston County FireFire Forestry Tactical10053edT
Johnston County FireFire Patch3020bccT
Johnston County FireStatewide Fire3036bdcT
Johnston County FireFire Marshal10043ecT
Johnston County FireAntioch Fire Department Private103440aT
Johnston County FireBethany Fire Department Private103740dT
Johnston County FireBlackman's Crossroads Fire Department Private103940fT
Johnston County FireCorinth Holder Fire Department Private1040410T
Johnston County FireMeadow Fire Department Private1048418T
Johnston County FireThanksgiving Fire Department Private105441eT
Johnston County FireWest Johnston Fire Department Private105541fT
Johnston County FireJohnston Community College Fire Training3050beaT
Johnston County EMSEMS Paging10266T
Johnston County EMSEMS Comm20027d2T
Johnston County EMSJohnston County EMS – Tactical Channel20047d4T
Johnston County EMSEMS Patch3019bcbT
Johnston County EMSEMS Call20037d3T
County HospitalsJohnston Health Clayton20057d5T
County HospitalsJohnston Health Smithfield20067d6T

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Johnston County FireJohnston County Fire – Dispatch260026592D
Johnston County EMSJohnston County EMS – Tactical Channel260016591D

Nearest trunked radio sites

Distances are measured from the center of Pine Level.

Smithfield · Johnston County
RFSS 4 · Site 4 (hex 4) · NAC 004 · about 2 mi away
Control 851.225, 851.725, 852.2, 852.7, 853.225, 855.7125
Smithfield · North Carolina VIPER
RFSS 1 · Site 53 (hex 35) · NAC 1F2 · about 10 mi away
Control 856.0125, 859.6875
Voice 851.35, 852.5875, 853.175, 853.675, 853.9, 854.8625
Lee Plant PE · North Carolina VIPER
RFSS 3 · Site 38 (hex 26) · NAC 1F2 · about 13 mi away
Control 853.1375, 853.5125
Voice 851.6375, 852.05, 852.75, 858.0625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pine Level?

We do not have a fire dispatch channel listed specifically for Pine Level. The county-level fire dispatch channels in the same county: Johnston County Fire 154.3400 MHz, FM, CSQ.

Do fire departments and EMS use a trunked radio system in Pine Level?

Yes. The county-level systems that cover Pine Level are Fire and EMS talkgroups are listed for Johnston County: 24 talkgroups; North Carolina VIPER: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Pine Level?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Pine Level?

For Pine Level, start with the Smithfield site of Johnston County. Its control channels are 851.225, 851.725, 852.2, 852.7 MHz. Program a control channel first; the scanner finds the voice channels from it.